山汽矿井车设备

  • 服务热线:

    15065707252

当前位置:首页 > 新闻中心 > 常见问题

新闻中心

服务热线电话

15065707252

矿用装载机狭窄低矮巷道作业难题

来源:http://www.kuangjingjixie.com/ 发布时间:2022-07-22 浏览次数:0

内容详情:
矿井装载机,采用大功率四缸柴油机,功率储备大,动力强劲。整机外观大方、稳重。超低车身设计,狭窄低矮巷道作业难题。液压油路加装3级过滤,保证液压系统清
The mine loader adopts a high-power four cylinder diesel engine with large power reserve and strong power. The appearance of the whole machine is generous and stable. The ultra-low body design solves the problem of narrow and low roadway operation. The hydraulic oil circuit is equipped with three-stage filtration to ensure that the hydraulic system is clean
洁、通畅、可靠,延长各液压元件的使用寿命。后置排烟过滤系统,保证了巷道作业场所的空气清洁。 双摇臂矿井装载机、超低身矿井装载机.
Clean, unobstructed and reliable, extending the service life of hydraulic components. The rear smoke exhaust and filtration system ensures the air cleanliness of the roadway workplace. Double rocker arm mine loader, ultra low body mine loader
牵引力≥95n,掘起力≥13.0n,作业能力行业,征服各种恶劣工况。
Traction force ≥ 95n, digging force ≥ 13.0n, operation ability industry, conquer all kinds of bad working conditions.
矿井装载机机型特点:
Characteristics of mine loader model:
1、APD液压系统,。
1. APD hydraulic system, energy saving.
2、专有大扭矩传动链,匹配合理。
2. Proprietary large torque transmission chain, with reasonable matching.
3、特色重载型结构件,无冗重。
3. Featured heavy-duty structural parts, no redundancy.
4、超长轴距,工作能力、作业稳定性行业。
4. Industry with ultra long wheelbase, working capacity and stability.
5、主铰接对中设计,减小转弯半径,降低轮胎磨损和能量损耗。
5. The centering design of the main hinge reduces the turning radius and reduces tire wear and energy loss.
6、人机工程理念设计的驾驶室,整体式骨架结构,内饰精美,超大空间,隔音降噪。
6. The cab is designed with ergonomic concept, with integral skeleton structure, exquisite interior decoration, large space, sound insulation and noise reduction.
7、单排大片距散热器,防堵塞、易清理。
7. Single row large distance radiator, anti clogging, easy to clean.
8、配置多样,机具齐全,适应不同区域、不同工况施工要求。
8. With various configurations and complete machines and tools, it can meet the construction requirements of different areas and working conditions.
矿井装载机散热器或系漏水,造成液不足。检查漏水的原因,排除故障后加足水;
The radiator of the mine loader may leak, causing insufficient fluid. Check the cause of water leakage and add enough water after troubleshooting;
矿井装载机主要技术特点
Main technical characteristics of mine loader
整机车架采用Q460板材,承载力强。抗扭曲变形、抗拉伸,特别适用于井下作业。
The frame of the whole machine adopts Q460 plate with strong bearing capacity. Resistant to distortion and tension, especially suitable for underground operation.
摆动架采用回转支承机架摆动,此摆动型式终身无损坏。
The swing frame adopts the swing of the slewing bearing frame, and this swing type is free of damage for life.
整机行走系统采用进口液压泵及马达,可靠性高,此系统为高压变量,输出牵引力大,使铲装物料更为轻松。
The traveling system of the whole machine adopts imported hydraulic pump and motor, which has high reliability. This system is a high-pressure variable, and the output traction is large, which makes it easier to shovel and load materials.
整机动力储备强劲有力,铲装掘起力大,令井下作业。经济性能。
The power reserve of the whole machine is strong, and the shovel loading and digging force is large, which makes the underground operation. Economic performance.
工作操作系统为液压先导操作,大大降低了司机操作疲劳强度,进一步增加了作业效率(液压先导操作指:升臂,落臂、翻斗、收斗)。
The working operation system is hydraulic pilot operation, which greatly reduces the fatigue intensity of driver operation and further increases the operation efficiency (hydraulic pilot operation refers to boom lifting, boom lowering, bucket tipping and bucket retraction).
矿井装载机节温器损坏,导致大循环打不开,引起机器过热,应更换节温器。
The thermostat of the mine loader is damaged, which causes the large cycle to fail to open, causing the machine to overheat. The thermostat should be replaced.
* 超长轴距(2900mm),行业第三代装载机经典结构,作业能力更强,转弯半径更小,后轮磨损更低。
*The ultra long wheelbase (2900mm), the classic structure of the third generation loader in the industry, has stronger operation capacity, smaller turning radius and lower rear wheel wear.
整机停车行车制动系统为二合一,制动器为弹簧制动,液压释放,特别适合斜巷、平巷、铲装、出渣、性能高。
The parking and service braking system of the whole machine is two in one. The brake is spring braking and hydraulic release. It is especially suitable for inclined roadway, drift, shovel loading, slag discharge and high performance.
整机铲斗采用V型锰钢合金铲板设计可根据用户要求定做加工异形铲斗。
The bucket of the whole machine adopts V-shaped manganese steel alloy shovel plate design, which can be customized to process special-shaped buckets according to user requirements.
整机标配高低可调护顶车棚.适应性强,地面距离棚顶高度仅为1.8米。
The whole machine is equipped with a high and low adjustable roof shed. It has strong adaptability, and the height from the ground to the roof is only 1.8 meters.
整机标配矿山专用尼龙18层级耐扎耐切割轮胎,为您的铲装工作保驾护航。标配4条轮胎保护链条。
The whole machine is equipped with mine specific nylon 18-layer tie resistant and cutting tires as standard, which will escort your shovel loading work. Four tire protection chains are standard.
全系列标配进口尾气净化器,标配二次净化水洗箱,保证井下工作环境更为清洁.
The whole series is equipped with imported tail gas purifier and secondary purification water washing box as standard to ensure a cleaner underground working environment
以上就是为大家介绍的有关矿用装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com
The above is a detailed introduction about the mining loader, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.kuangjingjixie.com