山汽矿井车设备

  • 服务热线:

    15065707252

当前位置:首页 > 新闻中心 > 常见问题

新闻中心

服务热线电话

15065707252

装载机的制动盘出现问题的原因有

来源:http://www.kuangjingjixie.com/ 发布时间:2022-01-17 浏览次数:0

内容详情:
制动盘是装载机中的摩擦部分,除了具有所需的强度和刚度作为组件之外,它们还应该具有尽可能高和稳定的摩擦系数,以及合适的耐磨性、耐热性和散热性、热容量等。作为装载机的摩擦部分,制动盘很容易发生一些故障,比如:
The brake disc is the friction part of the loader. In addition to having the required strength and stiffness as components, they should also have as high and stable friction coefficient as possible, as well as appropriate wear resistance, heat resistance, heat dissipation, heat capacity, etc. As the friction part of the loader, the brake disc is prone to some faults, such as:
装载机制动摩擦衬片的损坏会导致金属衬片因摩擦而发出的尖叫声,并伴有过热现象。此时,我们应该更换刹车的摩擦片。
The damage of the brake friction lining of the loader will lead to the scream of the metal lining due to friction and overheating. At this point, we should replace the brake friction plate.
制动钳上有一个固定的螺栓,螺丝松动将导致制动钳偏斜。此时,零件和制动盘会出现相互干扰的情况,也会引起异常的噪音。
There is a fixed bolt on the brake caliper. Loosening the screw will cause the deflection of the brake caliper. At this time, parts and brake discs will interfere with each other and cause abnormal noise.
低压软管零件老化、磨损,油管接头松动或此部分的密封件出现损坏。我们需要控制相关的部分,做好检查,拧紧接头或更换橡胶管、密封件和其他零件。
The parts of low-pressure hose are aging and worn, the oil pipe joint is loose or the seal of this part is damaged. We need to control relevant parts, check, tighten joints or replace rubber pipes, seals and other parts.
制动钳的活塞上有一个密封圈。如果密封圈出现磨损的话,会导致制动液泄漏。这时,我们需要更换密封圈和防尘圈。
There is a sealing ring on the piston of the brake caliper. If the sealing ring is worn, it will cause brake fluid leakage. At this time, we need to replace the sealing ring and dust ring.
本文由隧道装载机为您提供,我们的网站是:我们将以全心全意的热情为您提供服务,欢迎您的访问!
This article is provided by tunnel loader. Our website is: http://www.kuangjingjixie.com We will serve you with wholehearted enthusiasm. Welcome to visit!