As we all know, loaders are widely used in earthwork construction machinery of highway, railway, construction, hydropower, port, mine and other construction projects. It can also excavate ore and hard soil with a light shovel. It is also possible to bulldoze, lift and unload other materials, such as wood, by changing different auxiliary working devices. Summer is coming, and the temperature in summer has a great impact on the use of construction machinery.

夏季高温很容易导致一些现象，例如因工程机械使用不当而导致轮胎爆裂。如果装载机在夏季长时间工作，轮胎会达到高温，内部压力会增加，轮胎的橡胶物理性能会降低，导致轮胎爆裂。那么装载机爆胎的原因是什么呢？我们应该如何避免它呢？

High temperature in summer can easily lead to some phenomena, such as tire burst due to improper use of construction machinery. If the loader works for a long time in summer, the tire will reach high temperature, the internal pressure will increase, and the rubber physical property of the tire will decrease, resulting in tire burst. So what is the reason for the tyre burst of the loader? How can we avoid it?

1、轮胎损坏：

1. Tire damage:

装载机工作环境较大，轮胎磨损严重，甚有很多划痕。如果轮胎有划痕的地方都会成为一个薄弱环节。在高温高压下，也很容易造成爆胎。

The working environment of the loader is large, and the tires are seriously worn and even have many scratches. If the tire has scratches, it will become a weak link. Under high temperature and high pressure, it is also easy to cause tire blowout.

2、胎压：

2. Tire pressure:

胎压过低或过高都会导致爆胎。装载机行驶过程中胎压低，胎温迅速升高，导致胎压变化，轮胎反复挤压变形，产生大量热量，容易导致爆胎。当轮胎压力过高时，轮胎橡胶的物理性能会降低，导致轮胎爆裂。

Too low or too high tire pressure will cause tire blowout. When the loader is running, the tire pressure is low and the tire temperature rises rapidly, which causes the tire pressure to change, and the tire is repeatedly squeezed and deformed, generating a large amount of heat, which is easy to cause tire burst. When the tire pressure is too high, the physical properties of tire rubber will be reduced, resulting in tire burst.

3、外力因素：

3. External force factors:

在高温天气下，工作时间长。此时，轮胎温度高，内部压力大。此时，如果遇到碰撞并用力敲击，轮胎会因外力而爆裂。此时，也不允许倒冷水。如果遇冷水，胎面和胎侧胶层的所有部分都会收缩不均匀而发生裂纹，从而缩短轮胎的使用寿命。

Long working hours in hot weather. At this time, the tire temperature is high and the internal pressure is high. At this time, if you encounter a collision and knock hard, the tire will burst due to external force. At this time, it is not allowed to pour cold water. In case of cold water, all parts of the tread and sidewall rubber layer will shrink unevenly and crack, thus shortening the service life of the tire.

因此，在夏季使用装载机时，如果发现胎压和胎温过高或工作时间过长，应将装载机停放在阴凉处冷却后再工作。需要注意的是，当轮胎压力过高时，不要使用放气的方式来降低轮胎压力，也不要向轮胎上泼冷水以避免工作时发生事故。

Therefore, when using the loader in summer, if it is found that the tire pressure and temperature are too high or the working time is too long, the loader should be parked in a cool place to cool before working. It should be noted that when the tire pressure is too high, do not use deflation to reduce the tire pressure, nor pour cold water on the tire to avoid accidents during operation.

以上就是为大家介绍的有关矿用装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com

The above is the detailed introduction of the mining loader for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.kuangjingjixie.com