山汽矿井车设备

  • 服务热线:

    15065707252

当前位置:首页 > 新闻中心 > 行业新闻

新闻中心

服务热线电话

15065707252

矿用装载机操作停止时的注意事项

来源:http://www.kuangjingjixie.com/ 发布时间:2022-07-27 浏览次数:0

内容详情:
下面给大家介绍一下矿井装载机操作停止时的注意事项。
Now let's introduce the precautions when the mine loader stops.
1、矿用装载机应停入在平地上,并将铲斗平放地面。当发动机熄火后,需反复多次扳动工作装置操纵手柄,确保各液压缸处于无压休息状态。当矿井装载机只能停在坡道上时,要将轮胎垫牢。
1. The mining loader should stop on the flat ground and put the bucket flat on the ground. When the engine shuts down, it is necessary to pull the operating handle of the working device repeatedly to ensure that all hydraulic cylinders are in a pressure free rest state. When the mine loader can only stop on the ramp, it is necessary to pad the tires firmly.
2、将各种手柄置于空挡或中间位置
2. Put various handles in neutral or middle position
3、先取走电锁钥匙,然后关闭电源总开关,后关闭门窗。
3. First remove the electric lock key, then turn off the main power switch, and then close the doors and windows.
4、不准停在有明火或高温地区,以防轮胎受热爆炸,引起事故。
4. It is not allowed to stop in areas with open fire or high temperature to prevent the tire from being heated and exploding, causing accidents.
5、利用组合阀或储气罐对轮胎进行充气时,人不得站在轮胎的正面,以防爆炸伤人。  矿用装载机主要用于空间狭窄的洞采作业的磷矿、铁矿、铜矿、金矿、银矿、铅锌矿、煤矿巷道等各种矿山、水电、隧道工程的碎石土料采集及输送施工装车。它是由机械手与输送机相接合,扒渣和输送装车功能合二为一,采用电动全液压控制系统的生产装置,具有、能耗小、效率高的特点。是矿山企业必不可少的的采矿设备,是人工和其它机械的替代产品。
5. When using the combination valve or air tank to inflate the tire, people should not stand in the front of the tire to prevent explosion injury. Mining loaders are mainly used for the collection, transportation, construction and loading of crushed stone and soil materials in various mines, hydropower and tunnel projects such as phosphate ore, iron ore, copper ore, gold ore, silver ore, lead-zinc ore, coal mine roadway and so on. It is a production device that combines the manipulator with the conveyor, and combines the functions of slag removal and transportation and loading. It adopts the electric full hydraulic control system, which has the characteristics of environmental protection, low energy consumption and high efficiency. It is an indispensable advanced mining equipment for mining enterprises and a substitute product for labor and other machinery.
矿山装载机采用加强型前后车架,通过了20万次疲劳强化试验,承载能力强,整机载荷分布合理,稳定性好。
The mine loader adopts reinforced front and rear frames and has passed 200000 fatigue strengthening tests. It has strong bearing capacity, reasonable load distribution and good stability.
矿山装载机采用矿用装载机专用加重型变矩器和驱动桥,增加了整机的可靠性。桥轮距窄半轴相对短,增大了车子的扭矩,增强了车子的掘进力提高了工作效率,大大降低了桥的损坏率。本机超窄的轮距,超低的高度能通过特小的人工巷道。
The mine loader adopts the special heavy-duty torque converter and drive axle of the mine loader, which increases the reliability of the whole machine. The axle wheel base is narrow and the half axle is relatively short, which increases the torque of the car, enhances the driving force of the car, improves the work efficiency, and greatly reduces the damage rate of the bridge. This machine has ultra narrow track width and ultra-low height, and can pass through the extremely small artificial roadway.
中首重工矿山巷道装载机的特性:
Characteristics of roadway loader of Zhongshou heavy industry mine:
双翻斗缸设计,活动灵活,崛起力大;
Double tipper cylinder design, flexible and powerful;
气顶油助力制动系统,制动效果更灵敏,行驶;
Air top oil assisted braking system, more sensitive braking effect, driving;
专用整体定轴式变速箱变矩器,性能更可靠维护更方便;
The special integral fixed axle transmission torque converter has more reliable performance and convenient maintenance;
可提供窄体和宽体两种车型可供选择,适合不同宽体工作环境;
Narrow body and wide body models are available, which are suitable for different wide body working environments;
水箱配重式烟尘过滤器,有效净化尾气排放;
The water tank counterweight smoke filter can effectively purify the exhaust emission;
国Ⅲ大功率发动机,绿色更!
National III high-power engine, green, energy-saving and environmental protection!
以上就是为大家介绍的有关矿用装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com
The above is a detailed introduction about the mining loader for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.kuangjingjixie.com