山汽矿井车设备

  • 服务热线:

    15065707252

当前位置:首页 > 新闻中心 > 行业新闻

新闻中心

服务热线电话

15065707252

井下装载机发动机启动后需要注意的事项

来源:http://www.kuangjingjixie.com/ 发布时间:2022-05-20 浏览次数:0

内容详情:
井下装载机是由机械手与输送机相接合,扒渣和输送装车功能合二为一,采用电动全液压控制系统的生产装置设备。发动机是为装载机提供动力的设备,它是否可以正常启动直接关系到装载机是否可以正常工作,今天我们就来了解一下井下装载机发动机启动后的注意事项。
The underground loader is a production device equipment which is connected by manipulator and conveyor, and the functions of slag raking, conveying and loading are combined into one. It adopts electric full hydraulic control system. The engine is the equipment that provides power for the loader. Whether it can be started normally is directly related to whether the loader can work normally. Today, let's learn about the precautions after the engine of underground loader is started.
井下装载机发动机启动后的注意事项
Precautions after starting the engine of underground loader
1、井下装载机发动机启动后,等制动气压达到安*气压的时候再准备起步,用于确保行车时的制动安*性。当出现紧急制动的时候,按下紧急及停车制动阀的按钮,使紧急及停车制动放下,挂1挡起步。没有紧急制动的话,只需放下停车制动手柄,正常起步即可。
1. After the engine of the underground loader is started, it is ready to start when the braking air pressure reaches the safety air pressure, which is used to ensure the braking safety during driving. In case of emergency braking, press the button of emergency and parking brake valve to put down the emergency and parking brake and start in gear 1. If there is no emergency braking, just put down the parking brake handle and start normally.
2、调整好后视镜,使驾驶员入座后可以有好的视野效果;确保井下装载机的喇叭、后退信号灯,以及所有的保险装置可以正常工作;在即将起步或在检查转向左右灵活到位的时候,应该先按下喇叭,用于警告周围人员注意安*;井下装载机在行走道路上的故障物需要清理干净,特别要注意铁块、沟渠之类的障碍物,以免把轮胎割破。
2. Adjust the rear-view mirror so that the driver can have a good field of vision when seated; Ensure that the horn, backward signal light and all safety devices of the underground loader can work normally; When you are about to start or check that the steering is flexible and in place, you should first press the horn to warn the surrounding personnel to pay attention to safety *; The faulty objects of the underground loader on the walking road need to be cleaned up, and special attention should be paid to obstacles such as iron blocks and ditches to avoid cutting the tire.
3、在井下装载机起步行走之前,应对所有的踏板、操纵手柄、方向盘先试一次,确定已处于正常状态才开始作业。要特别注意检查转向、制动是否完好。确定转向、制动完全正常之后,才可以起步运行;在装载机行进时将铲斗置于离地400mm左右的高度;井下装载机在进行作业的时候应该尽量避免轮胎太多、打滑;尽量避免两轮悬空,不允许只有两轮着地而继续作业。
3. Before starting the underground loader, all pedals, joysticks and steering wheels shall be tested first to ensure that they are in normal state before starting the operation. Check whether the brake and steering are in good condition. Only after confirming that the steering and braking are completely normal can it start and run; Place the bucket at a height of about 400mm above the ground when the loader is moving; When the underground loader is working, it should try to avoid too many tires and slipping; Try to avoid two wheels hanging in the air, and it is not allowed to continue the operation with only two wheels landing on the ground.
本文的精彩内容由井下装载机提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:http://www.kuangjingjixie.com我们有专门的客服为您解答问题
The wonderful contents of this article are provided by the underground loader. There are many wonderful contents on this website. You can click to enter more contents: http://www.kuangjingjixie.com We have special customer service to answer your questions